This is the COMPLETE Operating Instructions Manual for the Linde Electric Reach Truck Type 1120; Models R14, R16, R20, R25.
This Manual Describes Procedures for Operation, Handling, Lubrication, Maintenance, Checking, and Adjustment. it will help the operator or anyone Realize Peak Performance Through Effective, Economical and Safe Machine Operation and Maintenance.
Covered models:
R14
R16
R20
R25
Operating Instructions Manual Contains:
=========
1. Introduction
Your industrial truck
Intended use
Impermissible use
Description of use and climatic conditions
Symbols used
General description
Taking delivery of the industrial truck
Legal requirements for placing on the market
2. Safety
Safety guidelines
Inclines, ramps, docks and lifts .
Residual risks
Stability
In the event of tip-over
Handling consumables
Competent person
Regulations
3. Overview
Identification plates and labels
Nameplate
Capacity rating plate
Controls and indicators
Operator’s display
Lift height indicator (LHI)
Definition of direction of travel
4. Operation
Instructions for running-in
Pre-shift checks
Service plan
Check the battery state of charge
Check all controls and their operation
Check the battery securing latch
Check general condition of truck
The battery
Operator adjustments
Braking – twin pedal
Braking – single pedal
Driving – twin pedal
Driving – single pedal
Driving on upward and downward slopes
Operating the mast and attachments (with two joystick control)
Operating the mast and attachments (with four joystick control)
Working with a load
Before picking up a load
Picking up a load
Driving with a load
Setting down loads
Before exiting the truck
Special equipment
Lighting (options)
360° Steering (Option)
Opposite direction steering (Option)
Linde Forklift data Management – LFM (Option)
Closed circuit television
5. Maintenance
Maintenance safety guidelines
Covers and cowlings
Fuses
Emergency lower
Emergency steering and parking brake release
Jacking the truck
Hoisting the truck
Securing for transportation
Towing procedure
Mast unit
Lubricants and operating materials
Inspection and maintenance data
Routine inspection and maintenance
Maintenance schedules — standard
Service plan — as required
1000-hour service plan
3000 h Service plan
6000 h Service plan
Maintenance schedules — cold store
Service plan — as required (cold store version)
500-hour service plan (cold store version)
1500-hour service plan (cold store version)
3000-hour service plan (cold store version)
Motor
Check the parking brake gap
Chassis, bodywork and fittings
Clean the truck
Check the battery trolley slides and associated mechanism
Lubricate the cabin hinges and door latch (if fitted)
Check condition of side guide rollers (if fitted)
Undercarriage
Checking the condition and security of the wheels and tyres
Check the brake fluid level
Check condition of brake pipes
Check the load wheel brake shoes for wear
Change the brake fluid
Electrics/electronics
Check the condition of the battery and battery cables
Check the condition and security of electrical connections and cables
Hydraulic system
Check the hydraulic hoses and pipes for damage
Hydraulic system: Checking the oil level
Check the hydraulic return line filter
Replace the hydraulic tank breather filter
Changing the hydraulic oil
Replace the hydraulic return line filter
Load lift system
Check the lift chains for condition and security
Lubricate the mast channels, mast rollers, lift chains, chain pulleys and mast hose pulley assemblies
Lubricate the reach channels and rollers
Check the reach carriage rollers, adjust if required
Lubricate the fork carriage
Lubricate the tilt and sideshift slider pad
Shutting down
Taking the truck out of operation
Decommissioning the truck
6. Technical data
Dimensions
Type sheet R14N (narrow version), as at 07/2012
Type sheet R14, as at 07/2012
Type sheet R14HD (heavy load version), as at 07/2012
Type sheet R16N (narrow version), as at 07/2012
Type sheet R16, as at 07/2012
Type sheet R16HD (heavy load version), as at 07/2012
Type sheet R20N (narrow version), as at 07/2012
Type sheet R20, as at 07/2012
Type sheet R16HD (heavy load version), as at 07/2012
Type sheet R25, as at 07/2012
Mast variations
Battery data
Wheels and tyres
Noise emission levels
Vibration characteristics for body vibrations
=========
** Model Specification: Linde R14, R16, R20, R25 Electric Reach Truck 1120 Series
** Language: English
** Total Pages: 194
** File Format: PDF
** Requirements: Adobe PDF Reader
** Compatible: All Versions of Windows & Mac, Linux OS, Iphone, Ipad, Android etc…
=========
This QUALITY manual is 100 percents COMPLETE and INTACT,
no MISSING/CORRUPT pages/sections to freak you out! It also is Bookmarked and SEARCHABLE to make what you need easy to find. Complete download comes in PDF format which can work under all PC based Windows operating system and Mac also. It saves to your hard-drive and can be burned to CD-ROM. It can be viewed on any computer, as well as zoomed and printed.
This manual is INSTANT DOWNLOAD. It means no shipping cost or waiting for a CD / paper manual to Arrive in the Mail. You Will receive this Manual today via Instant Download on Completion of Payment via our secure Payment Processor. We Accept All Major Credit/Debit Cards and Paypal. Buy From us and I Guarantee You’ll be a Satisfied Customer and Contact us if You have any Questions.
After your payment is submitted, The Download Link will appear at the checkout page and it will also be sent to your E-Mail Address.
Thanks for Visiting!