This is the COMPLETE Operation & Maintenance Manual for the Bomag BW213D-4, BW211D-4, BW211PD-4 Single drum roller.
This Manual Describes Procedures for Operation, Handling, Lubrication, Maintenance, Checking, and Adjustment. It Will Help The Operator or anyone Realize Peak Performance Through Effective, Economical and Safe Machine Operation and Maintenance.
Operation & Maintenance Manual Contains:
=========
BW213D-4 :
Technical Data
Safety regulations
Indicators and Controls
3.1 General notes
3.2 Description of indicators and control elements
Operation
4.1 General notes
4.2 Tests before starting to operate
4.3 Starting the engine
4.4 Starting with jump wires
4.5 Driving the machine
4.6 Switching the vibration on and off
4.7 Operating the parking brake, stopping the machine
4.8 Shutting the engine down
4.9 Emergency exit
4.10 Adjusting the steering wheel
4.11 Adjusting the seat
4.12 Operating the hood
4.13 Towing in case of an engine failure
4.14 Transport
Maintenance
5.1 General notes on maintenance
5.2 Fuels and lubricants
5.3 Table of fuels and lubricants
5.4 Running-in instructions
5.5 Maintenance chart
5.6 Check the engine oil level
5.7 Check, clean the water separator
5.8 Check the fuel level
5.9 Checking the hydraulic oil level
5.10 Check the coolant level
5.11 Checking the dust separator on the oil bath air filter
5.12 Checking the tire pressure
5.13 Clean the cooling fins on engine and hydraulic oil cooler
5.14 Check the oil level in the drive axle
5.15 Checking the oil level in left/right wheel hubs
5.16 Check the oil level in the vibration bearings
5.17 Changing engine oil and oil filter cartridges
5.18 Change the fuel filter cartridge
5.19 Draining the sludge from the fuel tank
5.20 Service the battery
5.21 Change the fuel pre-filter cartridge
5.22 Checking, replacing the refrigerant compressor V-belt
5.23 Service the air conditioning
5.24 Check, adjust the valve clearance
5.25 Checking / replacing the ribbed V-belt
5.26 Check the engine mounts
5.27 Change the oil in the drive axle
5.28 Changing the oil in the wheel hubs
5.29 Change the oil in the vibration bearings
5.30 Retighten the fastening of the axle on the frame
5.31 Tightening the wheel nuts
5.32 Check the ROPS
5.33 Cleaning the oil bath air filter
5.34 Changing hydraulic oil and breather filter
5.35 Changing the hydraulic oil filter
5.36 Changing the coolant
5.37 Checking the injection valves
5.38 Service the combustion air filter
5.39 Adjust the scrapers
5.40 Adjust the parking brake
5.41 Changing the tires
5.42 Change the fresh air filter in the cabin
5.43 Tightening torques
5.44 Engine conservation
Trouble shooting
6.1 General notes
6.2 Engine
BW211D-4 / BW211PD-4:
Technical Data
Safety regulations
Indicators and Controls
3.1 General notes
3.2 Description of indicators and control elements
Operation
4.1 General notes
4.2 Tests before starting to operate
4.3 Starting the engine
4.4 Starting with jump wires
4.5 Driving the machine
4.6 Switching the vibration on and off
4.7 Operating the parking brake, stopping the machine
4.8 Shutting the engine down
4.9 Emergency exit
4.10 Adjusting the steering wheel
4.11 Adjusting the seat
4.12 Operating the hood
4.13 Towing in case of an engine failure
4.14 Transport
Maintenance
5.1 General notes on maintenance
5.2 Fuels and lubricants
5.3 Table of fuels and lubricants
5.4 Running-in instructions
5.5 Maintenance chart
5.6 Check the engine oil level
5.7 Check, clean the water separator
5.8 Check the fuel level
5.9 Checking the hydraulic oil level
5.10 Check the coolant level
5.11 Checking the dust separator on the oil bath air filter
5.12 Checking the tire pressure
5.13 Clean the cooling fins on engine and hydraulic oil cooler
5.14 Check the oil level in the drive axle
5.15 Checking the oil level in left/right wheel hubs
5.16 Check the oil level in the vibration bearings
5.17 Changing engine oil and oil filter cartridges
5.18 Change the fuel filter cartridge
5.19 Draining the sludge from the fuel tank
5.20 Service the battery
5.21 Change the fuel pre-filter cartridge
5.22 Checking, replacing the refrigerant compressor V-belt
5.23 Service the air conditioning
5.24 Check, adjust the valve clearance
5.25 Checking / replacing the ribbed V-belt
5.26 Check the engine mounts
5.27 Change the oil in the drive axle
5.28 Changing the oil in the wheel hubs
5.29 Change the oil in the vibration bearings
5.30 Retighten the fastening of the axle on the frame
5.31 Tightening the wheel nuts
5.32 Check the ROPS
5.33 Cleaning the oil bath air filter
5.34 Changing hydraulic oil and breather filter
5.35 Changing the hydraulic oil filter
5.36 Changing the coolant
5.37 Checking the injection valves
5.38 Service the combustion air filter
5.39 Adjust the scrapers
5.40 Adjust the parking brake
5.41 Changing the tires
5.42 Change the fresh air filter in the cabin
5.43 Tightening torques
5.44 Engine conservation
Trouble shooting
6.1 General notes
6.2 Engine
=========
** Model Specification: Bomag BW213D-4, BW211D-4, BW211PD-4 Single drum roller
** Language: English
** File Format: PDF
** Requirements: Adobe PDF Reader & WinZip
** Compatible: All Versions of Windows & Mac, Linux OS, Iphone, Ipad, Android etc…
=========
This QUALITY manual is 100 percents COMPLETE and INTACT,
no MISSING/CORRUPT pages/sections to freak you out! It also is Bookmarked and SEARCHABLE to make what you need easy to find. Complete download comes in PDF format which can work under all PC based Windows operating system and Mac also. It saves to your hard-drive and can be burned to CD-ROM. It can be viewed on any computer, as well as zoomed and printed.
This manual is INSTANT DOWNLOAD. It means no shipping cost or waiting for a CD / paper manual to Arrive in the Mail. You Will receive this Manual today via Instant Download on Completion of Payment via our secure Payment Processor. We Accept All Major Credit/Debit Cards and Paypal. Buy From us and I Guarantee You’ll be a Satisfied Customer and Contact us if You have any Questions.
After your payment is submitted, The Download Link will appear at the checkout page and it will also be sent to your E-Mail Address.
Thanks for Visiting.