This is the COMPLETE Operation & Maintenance Manual for the Bomag MPH122 Soil Stabilizer / Asphalt Recycler.

This Manual Describes Procedures for Operation, Handling, Lubrication, Maintenance, Checking, and Adjustment. It Will Help The Operator or anyone Realize Peak Performance Through Effective, Economical and Safe Machine Operation and Maintenance.

Operation & Maintenance Manual Contains:
=========
Technical Data
Safety regulations
Indicators and Controls
3.1 General notes
3.2 Description of indicators and control elements
Operation
4.1 General notes
4.2 Tests before taking into operation
4.3 Starting the engine
4.4 Starting under low temperatures
4.5 Starting with jump wires
4.6 Driving the machine to work
4.7 Emergency exit
4.8 Operating the service brake
4.9 Operating the parking brake
4.10 Operating the hydraulic system emergency stop switch
4.11 Shutting the engine down
4.12 Parking on a slope
4.13 Preparing for work
4.14 Adjusting working depth, cutting depth
4.15 Switching on the load limit sensing control and adjusting the nominal speed
4.16 Adjusting the tailgate
4.17 Steering the rear axle
4.18 Adjusting the oscillation angle of the rotor (cross-slope)
4.19 Water dosing system, preparing for work
4.20 Finishing work
4.21 Changing the tires
4.22 Towing
4.23 Transport
Maintenance
5.1 General notes on maintenance
5.2 Fuels and lubricants
5.3 Table of fuels and lubricants
5.4 Running-in instructions
5.5 Maintenance chart
5.6 Checking the engine oil level
5.7 Checking the fuel level
5.8 Checking the hydraulic oil level
5.9 Check the condition of the cutting teeth
5.10 Checking front and rear tire pressures
5.11 Inspect the machine visually for damage and leaks
5.12 Checking the coolant level (compensation tank)
5.13 Checking the condition of the coolant
5.14 Check/empty the fuel pre-cleaner (water separator)
5.15 Cleaning the lateral hood boxes
5.16 Cleaning the air conditioning condenser
5.17 Cleaning the cabin ventilation filter
5.18 Cleaning the dirt scrapers on the hydraulic cylinders for the rotor hood
5.19 Cleaning the charge air filter
5.20 Grease oscillating articulated joint and steering cylinder bearings
5.21 Greasing the lift cylinder bearings on the rotor hood
5.22 Grease the bearings of the lift cylinders on the rotor hood gates
5.23 Greasing oscillating joint and rear axle steering
5.24 Grease the hinges of the battery compartment door
5.25 Cleaning front radiator (water/hydraulics)
5.26 Change the engine oil
5.27 Changing the engine oil filter
5.28 Checking condition and tension of generator V-belt, replacing the V-belt
5.29 Check condition and tension of refrigerant compressor V-belt, replace the V-belt
5.30 Servicing the air conditioning
5.31 Checking the oil level in the rear axle reduction gear
5.32 Clean the breather valve for the reduction gear on the rear axle
5.33 Checking the oil level in the rear axle
5.34 Cleaning the rear axle ventilation valve
5.35 Check the oil level in the left and right hand planetary gears on the rear axle
5.36 Battery service, check the main battery switch
5.37 Check the engine mounts
5.38 Draining the fuel tank sludge
5.39 Checking the oil level in the front right/left hand travel gears
5.40 Changing the oil in the rear axle reduction gear
5.41 Change the oil in the left and right hand planetary gears on the rear axle
5.42 Changing the oil in the rear axle
5.43 Checking/changing the coolant
5.44 Checking, adjusting the valve clearance
5.45 Changing the fuel filter
5.46 Changing the fuel prefilter element
5.47 Check fastening of engine / turbocharger / combustion air hoses
5.48 Oil change in the front travel gears
5.49 Changing the hydraulic oil
5.50 Changing the hydraulic oil fine filter
5.51 Tightening the screws on the articulated joint
5.52 Clean, change the dry air filter cartridge
5.53 Replacing the cutting tooth holders/cutting teeth
5.54 Grease the bearings of the lift cylinder for the cabin
5.55 Water sprinkler system, maintenance in the event of frost
5.56 Fill the container for the windscreen washer system, maintenance in the event of frost
5.57 Tightening torques for screws with metric unified thread
5.58 Conservation
Trouble shooting
6.1 General notes
6.2 Engine problems
6.3 Air conditioning system faulty

=========

** Model Specification: Bomag MPH122 Soil Stabilizer / Asphalt Recycler
** Language: English
** Total Pages: 140
** File Format: PDF
** Requirements: Adobe PDF Reader
** Compatible: All Versions of Windows & Mac, Linux OS, Iphone, Ipad, Android etc…

=========

This QUALITY manual is 100 percents COMPLETE and INTACT,
no MISSING/CORRUPT pages/sections to freak you out! It also is Bookmarked and SEARCHABLE to make what you need easy to find. Complete download comes in PDF format which can work under all PC based Windows operating system and Mac also. It saves to your hard-drive and can be burned to CD-ROM. It can be viewed on any computer, as well as zoomed and printed.

This manual is INSTANT DOWNLOAD. It means no shipping cost or waiting for a CD / paper manual to Arrive in the Mail. You Will receive this Manual today via Instant Download on Completion of Payment via our secure Payment Processor. We Accept All Major Credit/Debit Cards and Paypal. Buy From us and I Guarantee You’ll be a Satisfied Customer and Contact us if You have any Questions.

After your payment is submitted, The Download Link will appear at the checkout page and it will also be sent to your E-Mail Address.

Thanks for Visiting.