This is the COMPLETE Operating Instructions Manual for the Linde Electric Reach Truck Type 116-03; Models R14X-03, R16X-03, R17X-03, R17XHD-03.
This Manual Describes Procedures for Operation, Handling, Lubrication, Maintenance, Checking, and Adjustment. it will help the operator or anyone Realize Peak Performance Through Effective, Economical and Safe Machine Operation and Maintenance.
Covered models:
R14X-03
R16X-03
R17X-03
R17XHD-03
Operating Instructions Manual Contains:
=========
1. Introduction and general description
Introduction
EC declaration of conformity
General description
2. Safety
Operator safety guidelines
Residual risks
Stability
In the event of tip-over
Noise emission levels
Frequency characteristic for human body vibrations
3. Getting to know the truck
Location of identification plates and labels
Truck type/capacityplate
General view of truck
Operating controls and indicators
Operator’s display
Lift height indicator (LHI)
Magnetic fork position indicators
Definition of direction of travel
4. Operation
Running-in instructions
Pre-shift checks
The battery
Operator adjustments
Braking – twin pedal
Braking – single pedal
Driving – twin pedal
Driving – single pedal
Travelling onanincline
Operating the mast and attachments (with two joystick control)
Operating the mast and attachments (with three joystick control)
Operating the mast and attachments (with four joystick control)
Handling loads
Before leaving the truck
360° Steering (Option)
Opposite direction steering (Option)
Height pre-selector – LPS (option)
Operator code entry (Option)
Data Logger (Option)
Truck data management – LFM (Option)
Cold store cabin
Exterior lights (option)
5. Maintenance
Maintenance safety guidelines
Report of Thorough Examination
Covers and cowlings
Fuses
Emergency lower
Emergency steering andparking brake release
Slinging the truck
Securing for transportation
Jacking the truck
Towing procedure
Mast unit
Recommended lubricants
Inspection and maintenance data
Inspection and maintenance schedule
Routineinspectionandmaintenance
Pre-shiftchecks
Inspection and maintenance as required
Inspection and maintenance every 1000 hours (250 hours cold store version)
Inspection and maintenance every 2000hours (1000 hours cold store version)
Inspection andmaintenance every 5000 hours (2500 hours cold store version)
Inspection and maintenance every 10000 hours or 5 years, whichever is earlier (5000 hour or 30 months cold store version)
Inspection and maintenance as required
Cleanthetruck
Checkthebatteryelectrolytelevelandspecificgravity
Lubricate the lift chains and mast channels
Adjusttheliftchains
Replacethehydraulichosesandpipes
Check the drive wheel nuts
Check the load wheel axle bolts
1000 hr Inspection and maintenance (250 hr cold store)
Check the condition and security of the wheels and tyres
Check the condition of thebatteryandbatterycables
Check the condition and security of electrical connections and cables
Checktheparkingbrakegap
Check the hydraulic hosesandpipesfordamage
Check the lift chains for condition and security
Lubricate the mast channels, reach channels and lift chains
Lubricate the fork carriageplate
Lubricatethesideshiftbearings
Lubricate the tilt bearings (manual tilt only)
Check the hydraulic oillevel
Lubricate the seat support post and seat runners
Checktheclearanceofthemastretainers
Lubricate the mast rollersandchainheadpulleys(coldstoreonly)
Lubricate the mast hose pulley and mast cable pulley assembly (cold store only)
Lubricatetheliftcarriagerollers(coldstoreonly)
Lubricate the reach carriagerollers(coldstoreonly)
2000 hr Inspection and maintenance (1000 hr cold store)
Checkthebrakefluidlevel
Check the load wheel brake pads for wear
Replacethehydraulictankbreatherfilter
5000 hr Inspection and maintenance (2500 hr cold store)
Grease the load wheel bearings
Check condition of brake pipes
Change the hydraulic oil and suction filter
10000 hr Inspection and maintenance (5000 hr cold store)
Change the brake fluid
Taking the truck out of operation
Decommissioning the truck
6. Technical data
Dimensions
Technical data – 14 tonne capacity
Technical data – 16 tonne capacity
Technical data – 17 tonnecapacity
Technical data – 17 tonne capacity (heavy duty)
Battery data
Mast variations
=========
** Model Specification: Linde R14X-03, R16X-03, R17X-03, R17XHD-03 Electric Reach Truck 116-03 Series
** Language: English
** Total Pages: 196
** File Format: PDF
** Requirements: Adobe PDF Reader
** Compatible: All Versions of Windows & Mac, Linux OS, Iphone, Ipad, Android etc…
=========
This QUALITY manual is 100 percents COMPLETE and INTACT,
no MISSING/CORRUPT pages/sections to freak you out! It also is Bookmarked and SEARCHABLE to make what you need easy to find. Complete download comes in PDF format which can work under all PC based Windows operating system and Mac also. It saves to your hard-drive and can be burned to CD-ROM. It can be viewed on any computer, as well as zoomed and printed.
This manual is INSTANT DOWNLOAD. It means no shipping cost or waiting for a CD / paper manual to Arrive in the Mail. You Will receive this Manual today via Instant Download on Completion of Payment via our secure Payment Processor. We Accept All Major Credit/Debit Cards and Paypal. Buy From us and I Guarantee You’ll be a Satisfied Customer and Contact us if You have any Questions.
After your payment is submitted, The Download Link will appear at the checkout page and it will also be sent to your E-Mail Address.
Thanks for Visiting!